rockchalk06
- Joined
- Sep 12, 2023
- Messages
- 1,709
- Reaction score
- 4,589
- Trophy Points
- 113
Member
Staff member
Administrator
Fren
- Item Price or Trade Value
- $70
- General Location Area
- Oklahoma City
#BBK2751
I've had this for a bit. Sized approx 500ish rounds. Excellent shape. Does not have the Forster die ring or box, but will come with a Hornady ring.
This die does not size the body of the case. It allows you to bump the shoulders and control the neck. Decapping stem does not have an expander body. Just a decapping stem and rod.
My Bergara's chamber is really tight and I've never needed to size the body for reliable feeding. I bump the shoulders back .001" with this die and my ammo feeds perfectly.
Will come with the following bushings: .336, .333 and .331. I run the .336 which is .002" under a loaded round using Lapua Brass and a Hornady 168 ELD-M. I use the .333 to size .005" under Federal GMM brass and a 175 SMK and then bring it back up to .003" neck tension with a 21st Century mandrel. That makes for the perfect gas gun load. Either way, you can mess with bushing size if you like. These ONLY use Forster bushings ($15.00 Each)
Asking 80 shipped or trade for the following:
Federal 215 or 215M
CCI 250's or 450's
Berger 7mm 184 grain HT
Berger 6mm 109 LRHT
Berger 30 Cal 168 HT
Berger 30 Cal 230 HT
Trailboss
Bushing Bump Neck Sizing Die Kits, with 3 Neck Bushings
Order according to the profile of the specific cartridge.
www.forsterproducts.com
I've had this for a bit. Sized approx 500ish rounds. Excellent shape. Does not have the Forster die ring or box, but will come with a Hornady ring.
This die does not size the body of the case. It allows you to bump the shoulders and control the neck. Decapping stem does not have an expander body. Just a decapping stem and rod.
My Bergara's chamber is really tight and I've never needed to size the body for reliable feeding. I bump the shoulders back .001" with this die and my ammo feeds perfectly.
Will come with the following bushings: .336, .333 and .331. I run the .336 which is .002" under a loaded round using Lapua Brass and a Hornady 168 ELD-M. I use the .333 to size .005" under Federal GMM brass and a 175 SMK and then bring it back up to .003" neck tension with a 21st Century mandrel. That makes for the perfect gas gun load. Either way, you can mess with bushing size if you like. These ONLY use Forster bushings ($15.00 Each)
Asking 80 shipped or trade for the following:
Federal 215 or 215M
CCI 250's or 450's
Berger 7mm 184 grain HT
Berger 6mm 109 LRHT
Berger 30 Cal 168 HT
Berger 30 Cal 230 HT
Trailboss
Last edited: