What's new
OK Ballistics - Thats D.O.P.E. - Oklahoma Gun Forum

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Let's see your latest group 🎯

50.1 to 50.3 is the only thing I see that sticks out on paper. But the velocities are pretty wide apart. If I was just looking at velocities you got some good nodes to pick from.
 
I have some loaded at 50.5 and 50.1 to run. Was going to shoot them this morning, but the EPS went out in the Ram yesterday morning and it was towed to the shop
 
I have a couple .223 bolt rifles that shoot very good Axis rifles I cut the barrel shorter on.
A couple pictures. This one below shows cci 250 but that is not right it is CCI 450 It is all I use in my .223/5.56 cases.
300 yard cut .223 axis 001.JPG



Here is another rifle group at 100 yards. With 2 different years of LC cases 4 rounds for this one.
I was aiming at the hole in the side of the paper This was 25.0-25.2 gr H4895 using a Lee PPM.

All these shots are chambered from the magazine and shot as quick as I can get back on target.
My hunting loads.
001.JPG


Here is another load with the wife and myself shooting a group.

2-23-24 003.JPG
 
From my 12.5 gas gun with a 1-4
Top left is 50gr Zmax reloads.
Top right 69gr Barnes OTM factory.
Bottom left 75gr Hornady Black factory.
Sure likes the 69 OTM, doesn't like the 50gr., those shot way better out of my 16" bolt gun.
This will never be a precision rig per se, center dot of scope completely covers the red square....but not too shabby.

20250403_113841.jpg
 
From my 12.5 gas gun with a 1-4
Top left is 50gr Zmax reloads.
Top right 69gr Barnes OTM factory.
Bottom left 75gr Hornady Black factory.
Sure likes the 69 OTM, doesn't like the 50gr., those shot way better out of my 16" bolt gun.
This will never be a precision rig per se, center dot of scope completely covers the red square....but not too shabby.

View attachment 11610
What distance?
 
Well here you go, latest group. Yeah I know it isn't impressive. The two out side of the 2" square were before I got a real good focus on the scope and cross hairs. I guess what makes this a fairly good group is that it was shot at 200yards at 11:00 pm tonight with an Armasight Clip On Mini in front of a Leopold 1.5-5X scope with illuminated reticle. Pretty happy with this unit the vertical lines are my day light group the group with horizontal lines to the left are the night time group. They basically overlay! Pretty good for a gen 3 night vision clip on! KIMG1417~2.JPG
 
Back
Top